ATEX Category 3 Zone 2 (Gas) and Zone 22 (Dust) Static Dissipative / Grounded Vacuum Cleaner Systems. Designed for the remediation of asbestos, silica, lead and mold.
For the recovery of combustible/conductive dusts on a regular basis you need a vacuum cleaner/dust collector specifically designed for these applications (ATEX Category 1 or 2)
WARNING - Please take note of the following: Since a "cloud of dust" is not defined by ATEX, the National Fire Protection Agency (NFPA) warns that more than 0.8 mm of combustible dust laying on 5% of the floor of a room is considered a threat of explosion.
SELECTION CRITERIA FOR VACUUM CLEANERSHazardous areas
The following categories of equipment must be used in the Zones indicated:
| Category 1 vacuum cleaners | in Zone 0 or 20 |
| Category 1 or 2 vacuum cleaners | in Zone 1 or 21 |
| Category 1, 2 and/or 3 vacuum cleaners | in Zone 2 or 22 |
Pneumatic (Air-Operated) Series - Designed for use in Division 2
ATEX-12A (4W)
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup. Desinged for the recovery of designated substances
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust) & Zone 2 (Gas))
- For wet & dry recovery
- Stainless steel SAE 430 body and recovery tank. Recovery capacity of 10 gallons (38 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with SD* 4-wheels
- Dustless Drill Kit available
*SD - Static Dissipative
ATEX-12A (2+2W)
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup. Designed for the recovery of designated substances
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust) & Zone 2 (Gas))
- For wet & dry recovery
- Stainless steel SAE 430 body and recovery tank. Recovery capacity of 10 gallons (38 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with a 2 + 2 cart
- Dustless Drill Kit available
*SD - Static Dissipative
ATEX-12A (2+2W) MR
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup. Desinged for the recovery of designated substances
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust) & Zone 2 (Gas))
- For dry recovery only
- Equipped with Middle Ring for poly liners
- Stainless steel SAE 430 body and recovery tank. Recovery capacity of 10 gallons (38 liters)
- Includes poly liners and retainer clip
- Ready to use: filters and SD* tool kit included
- Equipped with SD* 4-wheels. Optional 2 + 2 cart available
- Dustless Drill Kit available
*SD - Static Dissipative
ATEX-A25L (DT) MFS SERIES
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with a Manual Filter Shaker (MFS) system
- For dry recovery
- Stainless steel SAE 430 body and recovery tank
- Ready to use: filters and SD* kit included
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.5 gallons (25 liters)
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
*SD Static Dissipative
ATEX-A25L (DT) MRP SERIES
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust)
- Available with a Manual Reverse Purge (MRP) system
- For dry recovery
- Stainless steel SAE 430 body and detachable recovery tank
- Ready to use: filters and SD* kit included
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.5 gallons (25 liters)
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
*SD Static Dissipative
ATEX-A55L (DT) MFS SERIES
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with a Manual Filter Shaker (MFS) system
- For dry recovery
- Stainless steel SAE 430 body and detachable recovery tank
- Ready to use: filters and SD* kit included
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Dustless Drill Kit available
*SD Static Dissipative
AVSD-25L (DT) MFS HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel SAE 430 recovery tank.
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
SD* Static Dissipative
AVSD-55L (DT) MFS HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel SAE 430 recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart for easy manoeuverability
- Dustless Drill Kit available
*SD Static Dissipative
CS-11 (DT) MRP (RE) HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- For dry recovery only
- Heavy duty powder coated body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
SD* - Static Dissipative
CS-40 (DT) RE HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated with twin venturis for higher power
- Available with Manual Filter Shaker (MFS), Manual Reverse Purge (MRP), Automatic Reverse Purge (ARP) or Automatic Purge System (APS)
- For dry recovery only
- Heavy duty poweder coated construction
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 40 gallons (152 liters)
CS-55 (TC) RE HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated. Single or twin venturi for higher power
- For wet and dry recovery. Designed to recover large spills
- Heavy duty powder coated body. Liquid recovery capacity of 55 gallons (209 liters)
- Tilt cart (TC) for easy emptying of recovered materials. 4 wheel dolly also available
- Dustless Drill Kit available
CS-65L (DT) MFS RE HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel SAE 430 detachable recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 17 gallons (65 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
SD* - Static Dissipative
CS-65L (DT) MRP RE HEPA
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- Total surface area of SD* Reverse Purge Cartridge and Skirt is: 19.1 ft² (17 700 cm²) for MRP models
- For dry recovery only
- Heavy duty powder coated body and stainless steel SAE 430 recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 17 gallons (65 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and tool basket
- Dustless Drill Kit available
SD* Static Dissipative
CSSD-30 (TF) SERIES
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Static Dissipative and Grounded
- Designed for use in the Powder Coating Industry
- Pneumatically (air) operated
- For dry recovery only - optional Floater System available liquid recovery
- Heavy duty powder coated body. Recovery capacity of 30 gallons (114 liters)
- Ready to use: filters and static dissipative tool kit included
CSSD-55 (TF) SERIES
Pneumatically (Air) Operated
Pneumatically (Air) Operated
Certifications
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Static Dissipative and Grounded
- Designed for use in the Powder Coating Industry
- Pneumatically (air) operated
- For dry recovery only - optional Floater System available liquid recovery
- Heavy duty powder coated body. Recovery capacity of 55 gallons (209 liters)
- Ready to use: filters and static dissipative tool kit included
Notes:
- Other models with more power and larger recovery capacities are available upon request. Electrically or Pneumatically (air) operated models available.
- In Zone 22, Category 2 and/or 3 vacuum cleaners can be used depending on the application required
- Please see selection criteria in Annex II of ATEX Directive 1999/92/CE.
- HEPA Filters - efficiency of 99.995% on 0.3 microns - Tested IEST RP-CC001.3 - H14 as per MPPS method EN 1822.
- ULPA Filters - efficiency of 99.999% on 0.3 microns - Filtration efficiency of 99.9995% on 0.18 microns - Tested IEST RP-CC001.3 - U15 as per MPPS method EN 1822
- Please be advised that all Tiger-Vac HEPA/ULPA Filters are Aerosol tested when assembled, either upstream or downstream, inside of the vacuum cleaners.
- All Tiger-Vac HEPA/ULPA Filters are assembled mechanically with 3 bolts and include a specially designed memory gasket in order to prevent any leaks during the life span of the gasket thus insuring the health and safety of the end user.
