Recommended Type H, Class H vacuum cleaners for the recovery of dry and wet/saturated asbestos
Tiger-Vac is pleased to present it's line of vacuum cleaners designed for the remediation of asbestos, silica, lead and mold. These vacuum cleaners are equipped with true HEPA Filters and are Aerosol Leak Tested before leaving our facilities.
To View all of Tiger-Vac's line of remediation vacuum cleaners please click here.
Tiger-Vac certifies the filter used in this vacuum cleaner has been individually tested by the manufacturer and is rated H14 or U15 as per EN 1822 by MPPS method.
Tiger-Vac also certifies that this vacuum cleaner has been individually tested for absolute filtration. Testing was performed using the recommendati
ons, standards and methods contained in IEST-RP-CC001.3 section 9. The challenge aerosol used was PAO (polyalphaolefin) – Emery 3004
| H | WARNING: This appliance contains dust hazardous to health. Emptying and maintenance operations, including removal of the dust collection means must only be carried out by authorized personnel wearing suitable personal protection. Do not operate without the full filtration system fitted. | H |
ATTENTION! PRESUMPTION OF CONFORMITY:
If a Leak Test is not performed each time a vacuum cleaner is assembled with a HEPA (H14) or ULPA (U15) Filter it is a Presumption of conformity. In not performing the Leak Test each time, and just afixing the H Sticker to the unit, the manufacturer cannot guaranty that a leak will not occur and endanger the health and safety of the end user.
Lightweight
T1-3L (BP) HEPA
Electrically Operated
Electrically Operated
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- 3-stage filtration system includes a HEPA Filter H14, Cloth Filter and Disposable Filter Bag
- Designed for general cleanup
- Lightweight and portable
- Single phase thru-flow motor
- For dry recovery only
- All plastic construction
- Recovery capacity of 0.8 gallon (3 liters) in Disposable Filter Bag
- Equipped with a backpack harness
- Complete tool kit included
- Dustless Drill Kit available
AS-5 HEPA
Electrically Operated
Electrically Operated
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos
- Lightweight and portable
- Thru-Flow heavy duty motor
- Equipped with a 4-stage filtration system
- For dry recovery only
- Heavy duty plastic recovery tank
- Ready to use: filter and tool kit included
- Equipped with a 4-wheel dolly
- Dustless Drill Kit available
AS-10 HEPA
Electrically Operated
Electrically Operated
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos
- Lightweight and portable
- Thru-Flow heavy duty motor
- Equipped with a 3-stage filtration system
- For dry recovery only
- Heavy duty plastic recovery tank. A stainless steel recovery tank is available
- Ready to use: filter and tool kit included
- Equipped with a 4-wheel dolly
- Dustless Drill Kit available
- 1260 WATT motor and 50' grounded power cord available
- Carriage Base with Accessories Tray also available
ASL-10 HEPA MR
Electrically Operated
Electrically Operated
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos
- Lightweight and portable
- By-Pass heavy duty motor
- Equipped with a 4-stage filtration system
- For wet and dry recovery
- Heavy duty plastic recovery tank. A stainless steel recovery tank is available
- Ready to use: filter and tool kit included
- Equipped with a 4-wheel dolly
- Dustless Drill Kit available
- 1260 WATT motor and 50' grounded power cord available
- Carriage Base with Accessories Tray also available
AS-400 HEPA (Dry)
Electrically Operated
Electrically Operated
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos.
- Lightweight and portable.
- By-Pass heavy duty motor.
- Equipped with a 3-stage filtration system.
- For dry recovery only.
- Heavy duty plastic recovery tank. A stainless steel recovery tank is available.
- Ready to use: filter and tool kit included.
- Equipped with a 4-wheel cart.
- Built-In Tool Storage Tray with two large 6 3/4" (170mm) rear wheels and two 2 1/4" (60mm) front wheels.
- Dustless Drill Kit available.
- 50' grounded power cord available.
AS-400 MR HEPA (W&D)
Electrically Operated
Electrically Operated
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery of lead and asbestos
- Lightweight and portable
- By-Pass heavy duty motor
- Equipped with a 3-stage filtration system
- With a Middle Ring for wet and dry recovery. Liquid/dry recovery capacity of 10 gallons (38 liters)
- Heavy duty plastic recovery tank. A stainless steel recovery tank is available
- Ready to use: filter and tool kit included
- Equipped with a 4-wheel cart
- Built-In Tool Storage tray with two large 6 3/4" (170mm) rear wheels and two 2 1/4" (60mm) front wheels
- Dustless Drill Kit available
- 50' grounded power cord available
Heavy Duty
2D-16 (TC) RE HEPA MR (ASBESTOS)
Electrically Operated
Electrically Operated
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- By-Pass heavy duty motor
- Middle Ring for poly liner for the recovery of wet/saturated asbestos
- For wet and dry recovery
- High-density Polyethylene recovery tank. Liquid recovery capacity of 15 gallons (57 liters)
- Silent operation
- Tilt cart (TC) for easy disposal of recovered materials
- Dustless Drill Kit available
4D-16 (TC) RE HEPA MR (ASBESTOS)
Electrically Operated
Electrically Operated
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Dual By-Pass/Dual speed heavy duty motors. 2000 watts (2400 maximum)
- Designed for the recovery of wet/saturated asbestos
- For wet and dry recovery
- High-density Polyethylene recovery tank. Liquid recovery capacity of 15 gallons (57 liters)
- Silent operation
- Tilt cart (TC) for easy disposal of recovered materials
- Dustless Drill Kit available
TV-250 (DT) MFS EXTENDED HEPA
Electrically Operated
Electrically Operated
Power: 1-5 HP
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Static dissipative and conductive (Category 3, Zone 22)
- Muffler optional
- Manometer included
- Equipped with Manual Filter Shaker (MFS)
- Designed for general maintenance
- Continuous duty 3-phase motor
- Camlock, Ø2" (Ø50mm)suction intake
- For dry recovery only
- All powder coated steel construction
- Optional polyliner and clip for easy and safe disposal of recovered materials·
- Detachable Recovery Tank with a capacity of 7.4 gallons (28 liters)
- Accessories kit included.· Other optional accessories according to your needs available
TV-4 STD MFS
Electrically Operated
Electrically Operated
Power: 5 HP OPT. 7.5 HP
Certifications
Vacuum cleaner classified according to Dust Class B1 (BIA ZH 1/487)
Combustible dusts of the explosion classes St1, St2, St3 in Zone 22 (Previously Zone 11)
II 3 D IP54 T160oC
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- ULPA Filter - Optional with an efficiency of 99.999% on 0.12 micron. Tested: IEST RP-CC001.3. Filtration efficiency of 99.9995% on 0.18 micron. Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
- Category 3, Zone 2 (Gas) version available
- Muffler included
- Manometer included
- Equipped with a Manual Filter Shaker (MFS) system
- washable Main and Pre-Filters contained within a removable Filter Chamber
- Designed for the recovery of asbestos, lead, mold, etc.
- Continuous duty 3-phase motor/blower
- Available with 5.5 HP (4 kW) - 7.5 HP (5.5kW) motors (motors are in series)
- Camlock, Ø2.5" suction intake (accepts Ø70mm suction hose)
- For dry recovery only
- All powder coated construction
- Equipped with a polyliner and clip for easy and safe disposal of recovered materials
- Detachable Recovery Tank with a capacity of 15 gallons (63 liters)
- Optional accessories according to your needs available
- Dustless Drill Kit available
Recovery Units
STV-114L
- Designed for the remediation of wet/saturated Asbestos
- To be connected to any power/suction unit
- Wet & dry recovery
- Drain valve opening, Ø2" (Ø50mm), located on the bottom of the recovery tank
- Can be sold as a complete unit, including standard drum and dolly, or as a top fill powerhead only
- Recovery capacity of 23 gallons (85 liters)
- Suction intakes, Ø2.5" (can accept Ø50mm and Ø70mm suction hoses)
- Based on a detachable 4-wheel dolly with ring and handles
- Special asbestos recovery poly liner and clip included
- Tools and accessories optional
